1PCS YB4835VA Digital Voltmeter(White,DC10A,DC0-600V)

OhmmetersYB4835VA Digital Voltmeter Amperemeter DC 0-100V 300V 600V Panel Ampere Voltage and Current Meter DC 10A 20A 50A 100A 200A 300A 500A 999mA, 99.9mA, 9.99mA1. 99.9mA, 9.99mA, 999mA, 2A, 5A, 10A, 20A, with built-in shunt.2. If the current exceeds 20A, a shunt must be used to work, even if it is 0.1A, otherwise it will burn out.3. For currents above 20A, the shunt is not built-in and needs to be purchased separately.(1) If you have a shunt, please note the specifications of your shunt4. Because the floating charge voltage of a 24V after being fully charged may exceed 30V, it is "not" recommended to use a 24V directly.5. In the following cases, it is strongly recommended to choose an isolated meter (isolated power supply meter):(1) When two or more instruments are installed on one device. (2) When an isolated power supply cannot be used.Power supply voltage: DC3.5～30V (Note: The maximum input voltage cannot exceed 30V, otherwise it will burn out.)<;20 mADisplay mode: 0.39" LED, red represents voltage, green represents currentDimensions: 70×40×30 mmMounting opening: 68 x 38 mmMeasuring rate: 500mS/timeMeasurement accuracy: 1% (±2 digits)The negative pole of the power supply is connected to the test terminal and requires an independent power supply. It is not allowed for more than two instruments to share one power supply.Wide supply range with reverse polarity protection.Instrument power supply: two-wire terminalBlack wire: negative pole of power supply.Red wire: positive pole of power supply.Test terminal: three-wire terminalCOM: Test common terminal (COM is the common negative pole of the voltmeter and ammeter)V+: Test positive voltage inputA+: Test positive current input. It can only be connected to the negative pole of the load and the negative pole of the load power supply, as shown in the figure below.For "20A or less", no shunt required:Applicable to "20A and above, a shunt is required:Dimensions: 70x40x39mmWorking temperature: -10~+50 degreesSupply voltage: DC0-100V/200V/300V/600VAccuracy level: 1% +/- 2 digits: YB4835VADisplay Type: Numbers onlyDIY Supplies: Origin: Mainland ChinaTest voltage: DC0-100V/200V/300V/600VTest current: DC999mA/3A/5A/10A/20A/50A/100A/200A/300A/500A/1000AWorking pressure: 80~106kPaMounting hole: 68x38mmDisplay type: 0.39'' LED, red and green digitalFeatures: Five lines

• Ohmmeters