Car Inner Tie Rod Boot Kit with Boot Clamp Pliers,Soft Car Rack and Pinion Boots Keeps Steering Parts Includes Ties/Clamps,Cuttable Cars Accessories Steering Rack Boots

UPGRADED CAR INNER TIE ROD BOOT KIT TO PROTECT YOUR CAR'S STEERING SYSTEM COMPONENTSProduct AttributesColors: BlackSizes: Steering Rack Boot: Overall Size: 8.85*2.42*2.42 inch Small Opening: OD: 0.42 inch / ID: 0.39 inch Large Opening: OD: 1.34 inch / ID: 1.25 inch ID (Actual Range): 0.39", 0.78", 1.1", 1.37", 1.25", 1.49", 1.65", 1.77" Different OD: 0.42", 1", 1.3", 1.7", 1.34", 1.5", 1.6", 1.8", 2"Tie Length: 7.8 inch Plier Length: 9.33 inchWeight: 15.13 ozMaterial: Silicone, Carbon SteelPackaging: Inner Tie Rod Boot*2, Small Locking Clamp*2, Large Locking Clamp*2, Ties*6, Boot Clamp Plier*1Product Functions & FeaturesCar Inner Tie Rod Boot:1. Dust Sealing: Using our inner tie rod boot, the steering parts are sealed to block dust from entering the parts2. Silicone Material: Silicone material is resistant to high and low temperatures, not easy to lose the original structure due to temperature changes, providing long-term protectionBoot Clamp Plier:1. Anti-skid Handles: Plier handle is wrapped with anti-skid material, so that you can hold the tool firmly even when your hands are sweaty, avoiding bumps and damages caused by dislodging the hand2. Carbon Steel Material: Carbon steel material pliers, high strength and rigidity, to meet the force requirements, in the clamp to apply large force for locking work, not easy to break and bendProduct InstallationInstallation of The Inner Tie Rod Boot:1. Dismantle the old inner tie rod boot2. Clean the surface of the mounting location3. Attach the new inner tie rod boot to the corresponding location4. Secure with clamps or tiesHow to Use The Boot Clamp Pliers:1. Adjust the locking clamps and press them into place2. Use pliers to clamp the protrusion for final fixing

• ID Size: Tie rod end boot contains a variety of ID range (actual application range), covering 0.39", 0.78", 1.1", 1.37", 1.25", 1.49", 1.65", 1.77", support the use of cutting according to the needs, please confirm the size in advance before cutting, to avoid cutting can not be use
• Avoid Wear and Tear of Components: Tie rod boots provide reliable protection for your steering system components. The flexible silicone boot keeps dust, water and other debris out of direct contact with the steering components, prolonging the service life of the steering system
• Size Parameters: Rack and pinion boot total dimensions of 8.85*2.42*2.42 inch (length*diameter*diameter), the large mouth outer diameter of 1.34 inch, the small mouth outer diameter of 0.42 inch, the total length of the plier 9.33 inch, tie length of 7.8 inch
• Upgrade Kit: The package contains inner tie rod boot*2, small locking clamp*2, large locking clamp*2, ties*6, boot clamp plier*1, the tie/locking clamp provide firm fixing, and the extra boot clamp plier is prepared for you, which makes it easier to fix the locking clamp
• Installation Steps: Detach the aging steering rack boot, install our new steering rack boot to the original position, take out the tie-wraps to fix it or use the clamps to fix it, when locking the clamps, adjust the clamps and press firmly, use the pliers to clamp the bumps for final tightening