DIN Rail Mount 12 Amp Solid State Relay SSR Module, in 4~32VDC, Out 100~240VAC. (8 Channels)

★★★★★ 4.3 147 Bewertungen

€27.62
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von internetslayers.com
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€27.62
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 04.10.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von internetslayers.com
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 215636384 Erscheinungsdatum 2026/04/12 Listenpreis €27.62 Modellnummer 215636384
Kategorie

Feature: 1, MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated). 2, Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode. 3, Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 12 Amp. Isolation: Phototriac. Zero cross: Yes. 4, Dual input terminal block, you can flexibility to configure the input control mode: Individual / Common Positive / Common Negative. 5, DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass PCB, dual copper layers. Characteristic Parameters: Input Signal Control Terminal: Action Voltage: 3 ~ 32 VDC. Current: 6mA at 5VDC, 8mA at 12VDC, 11mA at 24VDC, 13mA at 32VDC. Turn off voltage: 0 ~ 0.8 VDC. In-Out isolation surge voltage: 7500V. Output Terminal: Load voltage range: 100 to 240 VAC (50/60Hz). Max. on-state average current: 12 Amp. Non repetitive surge peak on-state current: 120 Amp (<20mS). Max. on-state voltage drop: 1.5V. Max. off-state current: <2mA / at 220VAC. Off-state max. allow voltage: 400V. Isolation: Phototriac. Zero cross: Yes. Load type: General purpose. Input terminal block: Wire range: 24 ~ 12 AWG / 2.5mm square. Strip length: 7mm. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass. Output(load) terminal block: Wire range 26AWG ~ 10AWG / 4mm square, Strip length 8mm, Screws - M3, steel, Cr3+ Zn plated. Pin header and Cage - Brass.

  • MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated).
  • Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode.
  • Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 12 Amp. Isolation: Phototriac. Zero cross: Yes.
  • Dual input terminal block, you can flexibility to configure the input control mode: Individual / Common Positive / Common Negative.
  • DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass PCB, dual copper layers.
Item Weight 1.52 pounds
Manufacturer Electronics-Salon
Item model number MD-D1304T Series
Package Dimensions 12.72 x 3.78 x 2.91 inches
Is Discontinued By Manufacturer No

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.3 von 5
★★★★★
147 Bewertungen | 60 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
80% (118)
4 Sterne
6% (9)
3 Sterne
3% (4)
2 Sterne
1% (1)
1 Stern
10% (15)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.