Schindelhauer Front Carrier - Frame Mounted

★★★★★ 4.6 89 Bewertungen

€69.65
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von internetslayers.com
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€69.65
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 04.10.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von internetslayers.com
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 235915049 Erscheinungsdatum 2026/07/09 Listenpreis €69.65 Modellnummer 235915049
Kategorie

We find it really handy to be able to carry heavy items on our bikes and so decided to design a front rack that securely attaches to the frame. The rack does not affect steering and the bike can sail through traffic even with heavier items on board. We have equipped it with the innovative VarioStraps system, which can be adjusted to adapt to the size and shape of whatever you are carrying. When not in use, the straps can be tucked away discreetly on the rack.

This aluminium-version is compatible with the Ortlieb Rack-Lock system.

The aluminium front rack is available for the Bosch e-bike model Oskar in graphite silver, as well as for Gustav and Greta in mineral grey as an upgrade, replacing the steel front rack used until 2019.

 

setup instructions

for Oskar: for Gustav and Greta:
  1. The rack is attached to the headtube with 4 bolts (M8x18 TX40) and 4 washers (included with delivery)
  2. Remove the two bolt-on covers at the side of the headtube (Torx 10)
  3. Press the 4 washers into the recesses at the side of the headtube. Apply a bit of assembly paste to keep the washers from falling off (included with delivery)
  4. Carefully position the front rack onto the headtube and align the mounting brackets with the threads and washers at the side of the headtube. Start screwing in the two lower bolts and proceed with the two upper ones
  5. Finish the installation by evenly tightening all 4 bolts to a torque of 15 Nm 
  1. The rack is attached to the headtube with 4 bolts (M8x18 TX40) and 4 washers (included with delivery)
  2. Hold the front rack over the head tube, aligning the four connecting  points with the drillings in the tube
  3. Place the cables in the space between head tube and rack on the left hand side (direction of travel)
  4. On the bottom, place one washer per side between the rack and the drilling of the head tube and fix it loosely with the bolts
  5. Repeat the same for the bottom two bolts
  6. Now you can tighten all 4 bolts with a torque of 15 Nm



Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.6 von 5
★★★★★
89 Bewertungen | 36 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
84% (75)
4 Sterne
3% (3)
3 Sterne
2% (2)
2 Sterne
1% (1)
1 Stern
10% (9)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.